QP-341E Features
Vision Inspection System
Front and rear linescan cameras are offered
as standard equipment, handling parts from 1608(0603) to SOICs, BGAs, CSPs, and large connectors. An additional
part inspection (CCD) camera can be attached at one or both sides to handle 1005(0402) and 3216. Parts of up
to 150 mm in length can be handled with use of the adjustable frame vision processing.
An enhanced multiple-light source unit allows the machine to switch freely between background and foreground lighting, without changing nozzles. As a result, the QP-341E supports a wider range of parts and supply methods, providing both efficient and flexible machine operation. More importantly, the light switching, separate wavelengths, and filter combinations produce high-definition and relatively noise-free images for consistent and accurate placements.
Placing System
The triple-shafted placing head is capable of holding three parts at once, placing them at a rate of 0.5 seconds per shot. Three single nozzles are selected as required from the nozzles and mechanical chucks held in your choice of two nozzle stations. The QP-341E's versatile nozzle types support both back- and frontlighting. This innovative nozzle design enables multiple nozzle replacements for quick changeovers and reduced costs. Each nozzle operates with independent rotational and vertical movement for efficient and accurate placement.
Nozzle Station A1: Standard equipment. Stores 16 regular nozzles and 13 mechanical chucks. Used with a single camera on the rear side of the machine.
Optional Nozzle Station A12: Stores 16 regular nozzles and 6 mechanical chucks. Used with the two-camera system on the rear side of the machine.
Device Supply Units
The two supply stations, a fixed feeder table and a versatile rear supply station, reduce equipment costs and increase the range of parts that can be supplied. The fixed feeder table houses either mechanical feeders or power feeders. Four supply units (MTU-8E, MTU-9E, MFU-6, PFU-3E) can be used interchangeably in the rear supply station, supplying parts via tray or feeder.
Production continues while replacing feeders, splicing part tapes with the optional splicing tool, or adding new parts to a MTU. Exchanging units doesn't require a special tool, cable, or tubing. Furthermore, the QP-341E accepts feeders or trays used on other Fuji machines, increasing your line's versatility and cost efficiency.
Front side, fixed part supply installation options:
1. MF (fixed mechanical feeder table): Accepts IP-series and QP-242E feeders
2. PF (fixed power feeder table): Accepts QP-132E and NP-series power feeders
3. No Installation
Rear side, interchangeable part supply options:
1. MTU-8E (multi-tray unit): 50 shelves. Capable of holding up to 100 part types by loading two trays (160 x 330) side
by side.
2. MTU-9E (multi-tray unit): 10 extractable drawers. Capable of holding up to 20 part types by loading two stacks of smaller
trays (160 x 330) onto each shelf.
3. MFU-6E (multi-feeder unit): Holds 24 - 8 mm tape feeders. Accepts IP-series and QP-242E feeders. A STU (single-tray unit)
can be mounted on the MFU-6E to supply tray parts.
4. PFU-3E (power feeder unit): Holds 24 - 8 mm double channel feeders. Accepts QP-132E and NP-series power feeders. Enables
batch changeovers. A STU (single-tray unit) can be mounted on the PFU to supply tray parts.